PLEASE READ Selecting the
correct type of above ground pool liner is the first
step in assuring a liner that will give a correct
fit. Please read the descriptions below and click
choose this type and continue.
Overlap Liners:
Overlap pool liners are
manufactured with an excess in wall material. The excess
material simply overlaps the pool wall. These liners
will fit both 48" & 52" pools already equipped with an
overlap liner. If your pool is 52" and is equipped with
an overlap liner now, then you could use a V-Bead liner
as shown below.
V-Bead Liners also known as
Hung Liners:
V-Bead
liners are manufactured with a heavy channel of the top
of the liner wall, which hangs over the pool wall. This
type of liner is used to replace overlap liners. However
unlike overlap liners, This liner is only available to
fit 52" pools.
Tru-Bead Liners also known
as simply Beaded Liners:
Tru Bead liners are manufactured
with a heavy bead at the top of the liner wall. This
bead snaps in or hangs in a channel. This channel is
commonly referred to as bead receiver. If your pool is
equipped with a bead receiver a Tru Beaded liner would
be used. This type of liner is NOT interchangeable with
overlap or V-Bead liners without additional equipment.
This liner is available for both 48" & 52" pool walls,
as well as 48" rectangular pools.
